#!/bin/bash

#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
# 
#   http://www.apache.org/licenses/LICENSE-2.0
# 
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#

# Run a test of the replication feature

source ./test_env.sh

trap stop_brokers INT TERM QUIT

stop_brokers() {
    if [ x$BROKER_A != x ]; then
        $QPIDD_EXEC --no-module-dir -q --port $BROKER_A
        unset BROKER_A
    fi      
    if [ x$BROKER_B != x ]; then
        $QPIDD_EXEC --no-module-dir -q --port $BROKER_B
        unset BROKER_B
    fi
}

if test -d ${PYTHON_DIR} && test -f "$REPLICATING_LISTENER_LIB" && test -f "$REPLICATION_EXCHANGE_LIB";  then
    rm -f queue-*.repl replication-*.log #cleanup from any earlier runs

    $QPIDD_EXEC --daemon --port 0 --no-data-dir --no-module-dir --auth no --load-module $REPLICATING_LISTENER_LIB --replication-queue replication --create-replication-queue true  --log-enable info+ --log-to-file replication-source.log  --log-to-stderr 0 > qpidd.port
    BROKER_A=`cat qpidd.port`

    $QPIDD_EXEC --daemon --port 0 --no-data-dir --no-module-dir --auth no --load-module $REPLICATION_EXCHANGE_LIB  --log-enable info+ --log-to-file replication-dest.log  --log-to-stderr 0 > qpidd.port
    BROKER_B=`cat qpidd.port`
    echo "Running replication test between localhost:$BROKER_A and localhost:$BROKER_B"

    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_B" add exchange replication replication
    $PYTHON_COMMANDS/qpid-route --ack 5 queue add "localhost:$BROKER_B" "localhost:$BROKER_A" replication replication

    #create test queues

    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_A" add queue queue-a --generate-queue-events 2
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_A" add queue queue-b --generate-queue-events 2
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_A" add queue queue-c --generate-queue-events 1
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_A" add queue queue-d --generate-queue-events 2
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_A" add queue queue-e --generate-queue-events 1

    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_B" add queue queue-a
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_B" add queue queue-b
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_B" add queue queue-c
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_B" add queue queue-e
    #queue-d deliberately not declared on DR; this error case should be handled

    #publish and consume from test queues on broker A:
    i=1
    while [ $i -le 10 ]; do
        echo Message $i for A >> queue-a-input.repl
        i=`expr $i + 1`
    done
    i=1
    while [ $i -le 20 ]; do
        echo Message $i for B >> queue-b-input.repl 
        i=`expr $i + 1`
    done
    i=1
    while [ $i -le 15 ]; do
        echo Message $i for C >> queue-c-input.repl 
        i=`expr $i + 1`
    done

    ./sender --port $BROKER_A --routing-key queue-a --send-eos 1 < queue-a-input.repl
    ./sender --port $BROKER_A --routing-key queue-b --send-eos 1 < queue-b-input.repl
    ./sender --port $BROKER_A --routing-key queue-c --send-eos 1 < queue-c-input.repl
    echo dummy | ./sender --port $BROKER_A --routing-key queue-d --send-eos 1

    ./receiver --port $BROKER_A --queue queue-a --messages 5 > /dev/null 
    ./receiver --port $BROKER_A --queue queue-b --messages 10 > /dev/null
    ./receiver --port $BROKER_A --queue queue-c --messages 10 > /dev/null
    ./receiver --port $BROKER_A --queue queue-d > /dev/null
    

    # What we are doing is putting a message on the end of repliaction queue & waiting for it on remote side
    # making sure all the messages have been flushed from the replication queue.
    echo dummy | ./sender --port $BROKER_A --routing-key queue-e --send-eos 1
    ./receiver --port $BROKER_B --queue queue-e --messages 1 > /dev/null

    #shutdown broker A then check that broker Bs versions of the queues are as expected
    $QPIDD_EXEC --no-module-dir -q --port $BROKER_A
    unset BROKER_A

    #validate replicated queues:
    ./receiver --port $BROKER_B --queue queue-a > queue-a-backup.repl
    ./receiver --port $BROKER_B --queue queue-b > queue-b-backup.repl
    ./receiver --port $BROKER_B --queue queue-c > queue-c-backup.repl


    tail -5 queue-a-input.repl > queue-a-expected.repl
    tail -10 queue-b-input.repl > queue-b-expected.repl
    diff queue-a-backup.repl queue-a-expected.repl || FAIL=1
    diff queue-b-backup.repl queue-b-expected.repl || FAIL=1
    diff queue-c-backup.repl queue-c-input.repl || FAIL=1

    grep 'queue-d does not exist' replication-dest.log > /dev/null || echo "WARNING: Expected error to be logged!"

    stop_brokers

    # now check offsets working (enqueue based on position being set, not queue abs position)
    
    $QPIDD_EXEC --daemon --port 0 --no-data-dir --no-module-dir --auth no --load-module $REPLICATING_LISTENER_LIB --replication-queue replication --create-replication-queue true  --log-enable info+ --log-to-file replication-source.log  --log-to-stderr 0 > qpidd.port 
    BROKER_A=`cat qpidd.port`

    $QPIDD_EXEC --daemon --port 0 --no-data-dir --no-module-dir --auth no --load-module $REPLICATION_EXCHANGE_LIB  --log-enable info+ --log-to-file replication-dest.log  --log-to-stderr 0 > qpidd.port
    BROKER_B=`cat qpidd.port`

    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_B" add exchange replication replication
    $PYTHON_COMMANDS/qpid-route --ack 5 queue add "localhost:$BROKER_B" "localhost:$BROKER_A" replication replication

    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_A" add queue queue-e --generate-queue-events 2
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_B" add queue queue-e
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_A" add queue queue-d --generate-queue-events 1
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_B" add queue queue-d

    i=1
    while [ $i -le 10 ]; do
        echo Message $i for A >> queue-e-input.repl
        i=`expr $i + 1`
    done

    ./sender --port $BROKER_A --routing-key queue-e --send-eos 1 < queue-e-input.repl
    ./receiver --port $BROKER_A --queue queue-e --messages 10 > /dev/null
    
    # What we are doing is putting a message on the end of repliaction queue & waiting for it on remote side
    # making sure all the messages have been flushed from the replication queue.
    echo dummy | ./sender --port $BROKER_A --routing-key queue-d --send-eos 1
    ./receiver --port $BROKER_B --queue queue-d --messages 1 > /dev/null

    # now check offsets working
    $QPIDD_EXEC --no-module-dir -q --port $BROKER_B
    unset BROKER_B
    $QPIDD_EXEC --daemon --port 0 --no-data-dir --no-module-dir --auth no --load-module $REPLICATION_EXCHANGE_LIB  --log-enable info+ --log-to-file replication-dest.log  --log-to-stderr 0 > qpidd.port
    BROKER_B=`cat qpidd.port`

    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_B" add queue queue-e
    $PYTHON_COMMANDS/qpid-config -b "localhost:$BROKER_B" add exchange replication replication
    $PYTHON_COMMANDS/qpid-route --ack 5 queue add "localhost:$BROKER_B" "localhost:$BROKER_A" replication replication
    # now send another 15
    i=11
    while [ $i -le 15 ]; do
        echo Message $i for A >> queue-e1-input.repl
        i=`expr $i + 1`
    done
    ./sender --port $BROKER_A --routing-key queue-e --send-eos 1 < queue-e1-input.repl
    
    ./receiver --port $BROKER_B --queue queue-e > queue-e-backup.repl
    diff queue-e-backup.repl queue-e1-input.repl || FAIL=1
    
    stop_brokers

    if [ x$FAIL != x ]; then
        echo replication test failed: expectations not met!
        exit 1
    else 
        echo queue state replicated as expected
        rm -f queue-*.repl replication-*.log
    fi

else
    echo "Skipping replication test, plugins not built or python utils not located"
fi

