/testing/guestbin/swan-prep
east #
 cp policies/* /etc/ipsec.d/policies/
east #
 echo "192.1.3.0/24"  >> /etc/ipsec.d/policies/clear
east #
 ipsec start
Redirecting to: [initsystem]
east #
 ../../guestbin/wait-until-pluto-started
east #
 # give OE policies time to load
east #
 ../../guestbin/wait-for.sh --match 'loaded 10' -- ipsec auto --status
000 Total IPsec connections: loaded 10, active 0
east #
 echo "initdone"
initdone
east #
 ../../guestbin/ipsec-look.sh
east NOW
XFRM state:
XFRM policy:
src 192.1.2.23/32 dst 192.1.2.253/32
	dir out priority PRIORITY ptype main
src 192.1.2.23/32 dst 192.1.2.254/32
	dir out priority PRIORITY ptype main
src 192.1.2.23/32 dst 192.1.3.253/32
	dir out priority PRIORITY ptype main
src 192.1.2.23/32 dst 192.1.3.254/32
	dir out priority PRIORITY ptype main
src 192.1.2.253/32 dst 192.1.2.23/32
	dir fwd priority PRIORITY ptype main
src 192.1.2.253/32 dst 192.1.2.23/32
	dir in priority PRIORITY ptype main
src 192.1.2.254/32 dst 192.1.2.23/32
	dir fwd priority PRIORITY ptype main
src 192.1.2.254/32 dst 192.1.2.23/32
	dir in priority PRIORITY ptype main
src 192.1.3.253/32 dst 192.1.2.23/32
	dir fwd priority PRIORITY ptype main
src 192.1.3.253/32 dst 192.1.2.23/32
	dir in priority PRIORITY ptype main
src 192.1.3.254/32 dst 192.1.2.23/32
	dir fwd priority PRIORITY ptype main
src 192.1.3.254/32 dst 192.1.2.23/32
	dir in priority PRIORITY ptype main
src 192.1.2.23/32 dst 192.1.3.0/24
	dir out priority PRIORITY ptype main
src 192.1.3.0/24 dst 192.1.2.23/32
	dir fwd priority PRIORITY ptype main
src 192.1.3.0/24 dst 192.1.2.23/32
	dir in priority PRIORITY ptype main
XFRM done
IPSEC mangle TABLES
iptables filter TABLE
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         
Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
ROUTING TABLES
default via 192.1.2.254 dev eth1
192.0.1.0/24 via 192.1.2.45 dev eth1
192.0.2.0/24 dev eth0 proto kernel scope link src 192.0.2.254
192.1.2.0/24 dev eth1 proto kernel scope link src 192.1.2.23
NSS_CERTIFICATES
Certificate Nickname                                         Trust Attributes
                                                             SSL,S/MIME,JAR/XPI
east #
 # should not show any hits
east #
 grep "initiate on-demand" /tmp/pluto.log
east #
 
